I am building a timber-frame arbor from 6"x6" and 6"x8" juniper timbers using traditional techniques. I did a test-fit of one of the mortise & tenon joints for one of the braces and noticed that it made an interesting sound, so I grabbed my binaural setup and did some recording. Sound Professionals binaural mic on a fake head into Sony PCM-M10 recorder.
Some rapid small movements.
At 1:12 I am able to pop the tenon out of the mortise using the crowbar.
Then I move the brace around on the beam - first dropping it a small distance, then sliding it back and forth on the beam, then rotating it. Both the brace and the beam are 6"x8" so they are quite heavy.
Type
Wave (.wav)
Duration
3:06.752
File size
51.3 MB
Sample rate
48000.0 Hz
Bit depth
24 bit
Channels
Stereo
Comments
